Benutzer:Zim: Unterschied zwischen den Versionen
Erscheinungsbild
Inhalt gelöscht Inhalt hinzugefügt
Zim (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Zim (Diskussion | Beiträge) update |
||
| Zeile 18: | Zeile 18: | ||
07.02.2008: |
07.02.2008: |
||
kamikaze 7.09 |
kamikaze 7.09 |
||
olsr: /etc/init.d/olsrd |
- olsr: /etc/init.d/olsrd |
||
- USE_CONF_F=/etc/olsrd.conf |
- USE_CONF_F=/etc/olsrd.conf |
||
mrd6: |
|||
- debian-config funktioniert, default-log aendern... |
|||
ahcp: |
|||
- funktioniert |
|||
- config folgt |
|||
babel: |
|||
- kein broadcast des default-gw |
|||
ipv6-debian-mirror: |
|||
- deb ftp://ftp.ipv6.debian.org/debian |
|||
flashen: |
|||
- fonera: |
|||
- mtd -e vmlinux.bin.l7 write openwrt-atheros-vmlinux.lzma vmlinux.bin.l7 |
|||
- mtd -e rootfs write openwrt-atheros-root.squashfs rootfs |
|||
- wrt54g per tftp |
|||
- atftp --trace --option "timeout 1" --option "mode octet" --put --local-file bin/openwrt-brcm-.bin 192.168.1.1 |
|||
- wrt54g per console |
|||
- mtd -r -e linux openwrt-brcm-.bin linux |
|||
Version vom 13. Februar 2008, 01:21 Uhr
Informatikstudent
Schwerpunkt:
- Routing/Switching (CCNA) - IPv6
OpenWRT:
- Kamikaze fuer Linksys WRT54GL - AP, IPv6, aiccu, radvd - Kamikaze-nano fuer Linksys WRT54GS-V5 (2MB Flash) - grundlegende AP-Funktion, keine WebIF, (noch) kein OLSRd, kein OpenVPN
Da es schon genug Leute im Verein gibt, die sich um Kamikaze-Port kuemmern, werd ich davon meine Finger lassen.
- Es gibt aus meiner Sicht gewiss nicht genug Leute, eher zu wenige. --Mathias 13:01, 13. Jun 2007 (CEST)
07.02.2008:
kamikaze 7.09
- olsr: /etc/init.d/olsrd - USE_CONF_F=/etc/olsrd.conf
mrd6:
- debian-config funktioniert, default-log aendern...
ahcp:
- funktioniert - config folgt
babel:
- kein broadcast des default-gw
ipv6-debian-mirror:
- deb ftp://ftp.ipv6.debian.org/debian
flashen:
- fonera: - mtd -e vmlinux.bin.l7 write openwrt-atheros-vmlinux.lzma vmlinux.bin.l7 - mtd -e rootfs write openwrt-atheros-root.squashfs rootfs - wrt54g per tftp - atftp --trace --option "timeout 1" --option "mode octet" --put --local-file bin/openwrt-brcm-.bin 192.168.1.1 - wrt54g per console - mtd -r -e linux openwrt-brcm-.bin linux